Replace the Tuck-Away

Bail and lower support, 63058

Assembly guide step 13 in reverse, then forward. The manual: "Tighten hardware until it is secure. DO NOT OVERTIGHTEN HARDWARE." No power drill.

1. Take the lid off and set it down upside down.
2. Inside the bowl, undo the lock nuts on the 2 shoulder bolts at the rear rim and pull the bolts out.
3. Undo the nut on the lower support's carriage bolt and take the old holder off.
4. Fit the new bail on its shoulder bolts, a washer each side of the bowl wall, the lock nut inside.
5. Fit the lower support with the carriage bolt, washer and nut.
6. Snug all 3 nuts and check the lid slides in and hangs.

Part 63058 ("lid bail"): $40.99 in the US shop; in the UK, through Weber UK customer service.