Legs, spring clips, wheels and triangle

A leg that drops out

Assembly guide steps 3 to 6. Weber gives no removal steps; pulling a leg is that order reversed.

1. With the kettle cold, lift out the grates and take off the ash catcher.
2. With a helper holding the bowl, pull the loose leg out of its socket.
3. Look at the spring clip in the leg top: its button must come through the leg hole.
4. Replace a lost or weak clip: UK 65183 (set of 3) or US leg parts 91732.
5. Push the leg back into its socket until it clicks.
6. Check the triangle is still hooked into the front leg.

Wheels, hub caps and the triangle

Assembly guide steps 7 to 11.

1. Pull the R-clip out of the hole in the axle end.
2. Take off the star hub cap and slide the wheel off.
3. Slide the new wheel on: UK 67585 through Weber UK customer service, US 65144.
4. Refit the hub cap and push the R-clip through the axle hole.
5. To change the triangle (UK 67002, US 80696), take both wheels off, slide the wheel legs off the axle, unhook it from the front leg, then fit the new one in the same order reversed.
6. Check all 3 legs are clicked home and both wheels spin.