The stand or the booster

Set it on the stand

The Arc stand technical document (DOC-0540) for the stand (AA1785 UK/EU, AA1786 US), which fits the Arc and Arc XL.

1. Build the frame, legs and top with the bolts loose, then tighten all fixings, "being careful not to over tighten".
2. Lock all four castor brakes.
3. Put the fixing (F003, with its washer) into the top of the stand with about 4 mm of thread showing.
4. Lift the oven on with two people, lining up its feet with the slots in the top.
5. Tighten the fixing until the oven is secure, without over-tightening.
6. Never use the oven on the stand without it secured.

The low booster (AA1783 / AA1784) works the same way, with no more than 2 mm of thread showing (DOC-0559). On the booster, lift by the oven, never by the booster or its shelf.