Connect the gas

Cylinder, regulator and hose

The manual (pp. 32 to 37). Use a propane cylinder with a safety collar, upright and outdoors, never rusty or dented, never under the oven, and never a second cylinder connected or nearby. Use only the hose and regulator Gozney specifies for your country.

1. Close the cylinder valve and check the control dial is off.
2. Take the cap off the gas inlet and check the inlet is clean and undamaged.
3. Pull back the collar on the hose coupler, push it onto the gas inlet and let go: the collar should spring back freely.
4. Fit the regulator by hand. UK click-fit: lever horizontal, press the button, place it on the cylinder, release, then lever vertical. Screw-fit (US, Germany): line up the threads and tighten by hand; never force it.
5. Lay the hose with no twists, away from hot surfaces and sun. It must be no longer than 1.5 m.
6. Do the leak test before you light it.